Are you that mountain biker?

Do your friends ask if you intend to ride the chairlift when you invite them out for a ‘few’ park laps? Do your top routes frequently involve pushing up and down trails that aren’t on any map? Do your favorite rides begin or end with headlamps, an ice chest and great friends? Does your bike have to do everything well to get you there and back again?

If you think you might be this rider, then Occam should be your bike!

With the Orbea Occam M30 you get a lightweight OMR carbon frame with 140mm of damping and a Fox 34 Float suspension fork with 140mm of travel. Shifting is done via the Shimano XT 12-speed groupset, and the OC2 telescopic seatpost adds to the comfort. The Race Face AR 30c rims in combination with Maxxis tyres will carry you over any obstacle.

Highlights of the Orbea Occam M30 XT mountain bike

• Trail Geometry – With its balanced geometry, the Occam is fast, efficient and versatile enough to put a big smile on your face on almost any trail.
• Integrated cable routing – The Occam uses fully integrated cable routing. Silicone closures at the entry and exit points in the frame as well as a clever connection between the front and rear frame triangle ensure optimal protection of the cables.
• Suspension – Modern trail bikes are used for impressively versatile riding. Some riders climb climbs that are thousands of feet long, while others do lap after lap in bike parks, with endless jumps. The Occam is up for any adventure with its suspension fork and rear shock.
• OMR Carbon Frame – Orbea Monocoque Race (OMR) frames blend high modulus fibers and high strength fibers exclusively. Prepreg carbon sheets are laser cut to minimize excess materials and overlap, and hours of pre-moulding ensure optimal compaction with the smallest amount of carbon. A full EPS (Expanded Polystyrene) mold helps eliminate wrinkles and voids.
• Asymmetrical Design – Instead of centering the shock and supporting it on both sides, Occam moves the shock to the left side of the frame. This allows the support strut placed on the right to sit more centrally and handle the suspension forces in the front triangle of the frame more efficiently. This improves stiffness in this particularly heavily loaded area of the frame without adding unnecessary weight.
• Redesigned Linkage – The Occam comes with a new two-piece Linkage design. Fewer components means fewer joints and therefore fewer bolts to come loose. Along the way, this provides more space in the axle. A practical multitool is accommodated there, which is securely held by magnets. This way, you always have the most important tools at hand.

The advantages of the Trail Geometry:

• LOWER STEERING ANGLE – High stability.
• LOWER BOTTOM BRACKET- Strong cornering position
• LONGER REACH – Lots of freedom of movement and super balance
• LONGER WHEEL STANCE – Stability at high speed
• HIGHER SADDLE ANGLE – More appropriate pedalling position
• SHORT SEAT TUBE – For long dropper posts

FACT SHEET OF ORBEA OCCAM M30 XT MOUNTAINBIKE – 2022 – METALLIC MULBERRY – BLACK (MATTE)